Skip to main content
Review | Tropical Environment, Biology, and Technology | Volume 1 - Issue 1 - 2023 | 47-66 | https://doi.org/10.53623/tebt.v1i1.238
© 2023 by the author(s), and is licensed under the Creative Commons Attribution 4.0 International (CC BY 4.0) License Creative Commons Attribution 4.0 International (CC BY 4.0) License

Utilization of Green Materials and Technology for Sustainable Construction in Malaysia

Author(s): Yu Yan Lau 1 , Gaurav Talukdar 2 ORCID https://orcid.org/0000-0002-7624-6205 , Hasti Widyasamratri 3 ORCID https://orcid.org/0000-0002-3433-0337 , Jie Wang 4 ORCID https://orcid.org/0000-0001-7254-315X , Mohamed El-shaammari 5
Author(s) information:
1 Department of Civil and Construction Engineering, Faculty of Engineering and Science, Curtin University, CDT250, Miri 98009, Malaysia
2 Department of Civil Engineering, Indian Institute of Technology, Guwahati, Assam, India, 781039
3 Department of Urban and Regional Planning, Faculty of Engineering, Sultan Agung Islamic University, Semarang, Indonesia
4 School of Hydrology and Water Resources, Nanjing University of Information Science & Technology, 219 Ningliu Rd, Nanjing, Jiangsu Province 210044, China
5 College of Water and Environmental Engineering, Sudan University of Science and Technology, Khartoum, Al-Khartum, Sudan

Corresponding author

Tropical Environment, Biology, and Technology

Volume 1 - Issue 1 - 2023

 About the journal
Submit your article

The aim of this study is to investigate the impact of the construction industry on the environment in Malaysia and propose strategies for mitigating its adverse effects through the adoption of sustainable building techniques. The study recognizes the importance of a healthy ecosystem in promoting health conditions, improving living standards, and ensuring a sustainable future for the nation. However, the recent population expansion has placed increased pressure on Malaysia's building industry and infrastructure, resulting in environmental degradation caused by the construction sector. To address this issue, the study examines the overall framework of ecological management implemented in Malaysia's construction industry. It evaluates key aspects of construction management, including the formulation and implementation of environmental policies, the involvement of stakeholders in decision-making processes, and the effective management of construction waste. Additionally, the study conducts a comprehensive assessment of specific regulations and guidelines pertaining to construction waste, water contamination, and air pollution, all of which are prevalent issues in Malaysia's construction activities. Furthermore, the study highlights the benefits of using green materials in construction to minimize environmental impact and enhance overall quality of life. It explores the implementation of green technologies in Malaysia, considering their advantages and disadvantages within the local context. By doing so, the study aims to provide insights into the challenges faced in the widespread adoption of green technologies, taking into account the perspectives of the government, economy, society, and available resources. Ultimately, the study emphasizes the need for collaboration among all stakeholders to address environmental damage effectively. It stresses the importance of an inclusive approach, ensuring that no one is left behind in the efforts to rectify the situation and prevent further deterioration of the environment. By taking proactive measures and implementing sustainable building techniques, it is hoped that the construction industry in Malaysia can contribute to a greener and more sustainable future for the nation.

Read Full-Text
Previous article
Next article

Alaloul, W.S.; Musarat, M.A.; Rabbani, M.B.A.; Iqbal, Q.; Maqsoom, A.; Farooq, W. (2021). Construction sector contribution to economic stability: Malaysian GDP distribution. Sustainability, 13, 5012. https://doi.org/10.3390/su13095012.

Khaertdinova, A.; Maliashova, A.; Gadelshina, S. (2021). Economic development of the construction industry as a basis for sustainable development of the country. E3S Web of Conferences, 274, 10021. https://doi.org/10.1051/e3sconf/202127410021.

Khan, R.A.; Liew, M.S.; Ghazali, Z.B. (2014). Malaysian construction sector and Malaysia vision 2020: Developed nation status. Procedia-Social and Behavioral Sciences, 109, 507513. https://doi.org/10.1016/j.sbspro.2013.12.498.

Chang, T.W.; Kumar, D. (2021). Overview of Environmental Management Practice for Construction in Malaysia. Civil and Sustainable Urban Engineering, 1, 1525. http://dx.doi.org/10.53623/csue.v1i1.33.

Hasmori, M.F.; Zin, A.F.M.; Nagapan, S.; Deraman, R.; Abas, N.; Yunus, R.; Klufallah, M. (2020). The on-site waste minimization practices for construction waste. IOP Conference Series: Materials science and engineering, 713, 012038. http://doi.org/10.1088/1757-899X/713/1/012038.

Patel, P.; Patel, A. (2021). Use of sustainable green materials in construction of green buildings for sustainable development. IOP Conference Series: Earth and Environmental Science, 785, 012009. http://doi.org/10.1088/1755-1315/785/1/012009.

Kuppusamy, S.; Chew, H.Y.; Mari, T.S.; Chai, C.S.. (2019). Implementation of green building materials in construction industry in Johor Bahru, Malaysia. IOP Conference Series: Earth and Environmental Science, 268, 012006. http://doi.org/10.1088/1755-1315/268/1/012006.

Zaboon, A.A.; Salih, R.J. (2021). The Experience of Green Technology in Malaysia and its Role in Enhancing Sustainable Development. Review of International Geographical Education Online, 11, 26312643. http://doi.org/10.48047/rigeo.11.08.246.

Paul, B. (2021). Multi-Dimensional Effectiveness of Environmental Impact Assessment (EIA) in Malaysia: The Perspectives of Practicing Environmental Consultants. Doctoral dissertation, Sunway University, Malaysia.

Nagapan, S.; Rahman, I. A.; Asmi, A. (2012). Factors contributing to physical and non-physical waste generation in construction industry. International Journal of Advances in Applied Sciences, 1, 110. http://doi.org/10.11591/ijaas.v1.i1.pp1-10.

Nagapan, S.; Rahman, I.A.; Asmi, A.; Adnan, N.F. (2013). Study of site's construction waste in Batu Pahat, Johor. Procedia Engineering, 53, 99103. https://doi.org/10.1016/j.proeng.2013.02.015.

Nagapan, S.; Rahman, I.A.; Asmi, A. (2012). Construction waste management: Malaysian perspective. International Conference on Civil and Environmental Engineering Sustainability (IConCEES), Malaysia, 2, 299309.

Wahi, N.; Joseph, C.; Tawie, R.; Ikau, R. (2016). Critical review on construction waste control practices: legislative and waste management perspective. Procedia-Social and Behavioral Sciences, 224, 276283. https://doi.org/10.1016/j.sbspro.2016.05.460.

Rahman, N.N.N.A.; Esa, N. (2014). Managing construction development risks to the environment. In Sustainable living with environmental risks; Kaneko, N., Yoshiura, S., Kobayashi, M., Eds.; Springer: Tokyo, Japan, pp. 193202. https://doi.org/10.1007/978-4-431-54804-1_16.

Yahaya, I. (2020). The Implementation of Environmental Practices by Malaysian Contractors. International Journal of Integrated Engineering, 12, 310318. https://doi.org/10.30880/ijie.2020.12.04.030.

Tao, G.; Feng, J.; Feng, H.; Feng, H.; Zhang, K. (2022). Reducing Construction Dust Pollution by Planning Construction Site Layout. Buildings, 12, 531. https://doi.org/10.3390/buildings12050531.

Kamaruddin, H.; Khalid, R.M.; Supaat, D.I.; Shukor, S.A.; Hashim, N. (2016). Deforestation and haze in Malaysia: Status of corporate responsibility and law governance. In Be-Ci 2016: 3rd International Conference On Business And Economics. https://doi.org/10.15405/epsbs.2016.11.02.34.

Din, S.A.M. (2011). The implementation of Environmental Management System (EMS) ISO 14001 among construction companies in Malaysia. Journal of Architecture, Planning and Construction Management, 1, 89108.

Omran, A.; Yahya, S.H.S. (2020). Environmental management system (EMS) within construction site: a case study in kelantan state, Malaysia. IOP Conference Series: Materials Science and Engineering, 847, 012039. https://doi.org/10.1088/1757-899X/847/1/012039.

Farouq, M.M.; Lawan, U.F.; Garba, N.; Anwar, F.H.; Baba, Z.B.; Labbo, M.S.; Aliyu, D.S. (2017). Implementation of Environmental Management System in Construction Industry: A Review. IOSR Journal of Mechanical and Civil Engineering, 14, 3338. http://doi.org/10.9790/1684-1405043338.

Yusoff, S.; Nordin, R.; Yusoff, H. (2015). Environmental Management Systems (EMS) ISO 14001 implementation in construction industry: A Malaysian case study. Issues in Social And Environmental Accounting, 9, 1831. http://doi.org/10.22164/isea.v9i1.97.

Aadal, H.; Rad, K.G.; Fard, A.B.; Sabet, P.G.P.; Harirchian, E. (2013). Implementing 3R concept in construction waste management at construction site. Journal of Applied Environmental and Biological Sciences, 3, 160166. https://doi.org/10.3390/su131910660.

Oyenuga, A.A.; Bhamidimarri, R. (2015). Sustainable approach to managing construction and demolition waste: An opportunity or a new challenge. International Journal of Innovative Research in Science, Engineering and Technology, 4, 1036810378. http://doi.org/10.15680/IJIRSET.2015.0411007.

Ng, L.S.; Tan, L.W.; Seow, T.W. (2017). Current practices of construction waste reduction through 3R practice among contractors in malaysia: Case study in penang. IOP Conference Series: Materials Science and Engineering, 271, 012039. http://doi.org/10.1088/1757-899X/271/1/012039.

Nazry, K. (2021). A Review Of The Sustainable Development Goals Policy Framework For Malaysian Local Governments. Malaysian Journal of Sustainable Environment, 8, 157177. https://doi.org/10.24191/myse.v8i2.13245.

Sharma, N.K. (2020). Sustainable building material for green building construction, conservation and refurbishing. International Journal of Advanced Science and Technology, 29, 53435350.

Osman, S.; Ahmad, M.; Zakaria, M.N.; Zakaria, A.M.; Ibrahim, Z.; Abu, F.; Bahari, S.A.; Jaafar, W.W. (2022). Bamboo as future bio-industrial material: Physical behaviour and bending strength of Malaysia’s Beting bamboo (Gigantochloa levis). IOP Conference Series: Earth and Environmental Science, 951, 012001. http://doi.org/10.1088/1755-1315/951/1/012001.

Mofidi, A.; Abila, J.; Ng, J.T.M. (2020). Novel advanced composite bamboo structural members with bio-based and synthetic matrices for sustainable construction. Sustainability, 12, 2485. http://doi.org/10.3390/su12062485.

Noh, H.M.; Sukri, N.H.A.; Kasim, N.; Zainal, R.; Musa, S.M.S.. (2021). Utilisation of Bamboo as Reinforcement Material in Concrete. Research in Management of Technology and Business, 2, 905920. https://doi.org/10.30880/rmtb.2021.02.01.068.

Ghazali, N.; Muthusamy, K.; Ahmad, S.W. (2019). Utilization of fly ash in construction. IOP Conference Series: Materials Science and Engineering, 601, 012023. http://doi.org/10.1088/1757-899X/601/1/012023.

Zeggar, M.L.; Azline, N.; Safiee, N.A. (2019). Fly ash as supplementry material in concrete: A review. IOP Conference Series: Earth and Environmental Science, 357, 012025. http://doi.org/10.1088/1755-1315/357/1/012025.

Thakur, A.; Tiwary, A.K. (2021). A Comparative Study on Conventional Clay Bricks and Autoclaved Aerated Concrete Blocks. IOP Conference Series: Earth and Environmental Science, 889, 012061. http://doi.org/10.1088/1755-1315/889/1/012061.

Sharma, A.K.; Kumar, S.; Mishra, N. (2019). Environmental Impact of Fly Ash Brick in Comparison with Traditional Brick. In Smart Technologies for Energy, Environment and Sustainable Development. Lecture Notes on Multidisciplinary Industrial Engineering; Kolhe, M., Labhasetwar, P., Suryawanshi, H., Eds.; Springer, Singapore, pp. 195201. http://doi.org/10.1007/978-981-13-6148-7_21.

Abdullah, N.; Sulaiman, F. (2013). The oil palm wastes in Malaysia. Biomass now-sustainable Growth and Use, 1, 7593. http://doi.org/10.5772/55302.

Yaro, N.S.A.; Napiah, M.; Sutanto, M.H.; Hainin, M.R.; Usman, A.; Rafindadi, A.D.; Abdulrahman, S.; Saeed, S.M. (2021). Utilization of palm oil mill residue as sustainable pavement materials: A review. International Journal of Integrated Engineering, 13, 6678. http://dx.doi.org/10.30880/ijie.2021.13.03.008.

Zaid, O.; Ahmad, J.; Siddique, M.S.; Aslam, F. (2021). Effect of incorporation of rice husk ash instead of cement on the performance of steel fibers reinforced concrete. Frontiers in Materials, 8, 665625. https://doi.org/10.3389/fmats.2021.665625.

Ozturk, M.; Saba, N.; Altay, V.; Iqbal, R.; Hakeem, K.R.; Jawaid, M.; Ibrahim, F.H. (2017). Biomass and bioenergy: An overview of the development potential in Turkey and Malaysia. Renewable and Sustainable Energy Reviews, 79, 12851302. https://doi.org/10.1016/j.rser.2017.05.111.

Kamaruddin, M.A.; Abdullah, M.M.A.; Zawawi, M.H.; Zainol, M.R.R.A. (2017). Potential use of plastic waste as construction materials: recent progress and future prospect. IOP Conference Series: Materials Science and Engineering, 267, 012011. https://doi.org.10.1088/1757-899X/267/1/012011.

Nyika, J.; Dinka, M. (2022). Recycling plastic waste materials for building and construction Materials: A minireview. Materials Today: Proceedings, 62, 32573262. http://doi.org/10.1016/j.matpr.2022.04.226.

Noh, H.M.; Bakar, N.F.N.A.; Kasim, N.; Zainal, R.; Musa, S.M.S. (2021). The Acceptance of Utilizing Low-density Polyethylene (LDPE) Plastic in Concrete Brick Among Construction Stakeholders. Research in Management of Technology and Business, 2, 865876. https://doi.org/10.30880/rmtb.2021.02.01.065.

Ogundairo, T.O.; Adegoke, D.D.; Akinwumi, I.I.; Olofinnade, O.M. (2019). Sustainable use of recycled waste glass as an alternative material for building construction-a review. IOP Conference Series: Materials Science and Engineering, 640, 012073, https://doi.org/10.1088/1757-899X/640/1/012073.

Lamba, P.; Kaur, D.; Raj, S.; Sorout, J. (2021). Recycling/reuse of plastic waste as construction material for sustainable development: a review. Environmental Science and Pollution Research, 29, 86156–86179. https://doi.org/10.1007/s11356-021-16980-y.

Mahat, N.A.A.; Alwee, S.N.A.S.; Adnan, H.; Hassan, A.A. (2019). Propelling green building technologies adoption in Malaysia construction industry. IOP Conference Series: Earth and Environmental Science, 233, 022032. https://doi.org/10.1088/1755-1315/233/2/022032.

Puvanasvaran, A.P.; Yop Zain, M.F.; Al-Hayali, Z.A.; Mukapit, M. (2012). Sustainability of Green Technology in Malaysia Industry. International Conference on Design and Concurrent Engineering. Universiti Teknikal Melaka.

Abdullah, W.S.W.; Osman, M.; Ab Kadir, M.Z.A.; Verayiah, R. (2019). The potential and status of renewable energy development in Malaysia. Energies, 12, 2437. https://doi.org/10.3390/en12122437.

Mekhilef, S.; Safari, A.; Mustaffa, W.E.S.; Saidur, R.; Omar, R.; Younis, M.A.A. (2012). Solar energy in Malaysia: Current state and prospects. Renewable and Sustainable Energy Reviews, 16, 386396. https://doi.org/10.1016/j.rser.2011.08.003.

Almaktar, M.; Abdul Rahman, H.; Hassan, M.Y.; Wan Omar, W.Z. (2015). Photovoltaic technology in Malaysia: past, present, and future plan. International Journal of Sustainable Energy, 34, 128140. https://doi.org/10.1080/14786451.2013.852198.

Silveira, J.L.; Tuna, C.E.; de Queiroz Lamas, W. (2013). The need of subsidy for the implementation of photovoltaic solar energy as supporting of decentralized electrical power generation in Brazil. Renewable and Sustainable Energy Reviews, 20, 133141. https://doi.org/10.1016/j.rser.2012.11.054.

Maradin, D. (2021). Advantages and disadvantages of renewable energy sources utilization. International Journal of Energy Economics and Policy, 11, 176–183. https://doi.org/10.32479/ijeep.11027.

Kamaruzzaman, S.N.; Abdul-Rahman, H.; Wang, C.; Karim, S.B.; Lee, T.Y. (2012). Solar technology and building implementation in Malaysia: A national paradigm shift. Maejo International Journal of Science and Technology, 6, 196. https://doi.org/10.11591/ijpeds.v12.il.pp474-488.

Quaranta, E. (2021). Innovative Projects and Technology Implementation in the Hydropower Sector. In Technological Innovations and Advances of Hydropower Engineering; Shang, Y. Ed.; IntechOpen: London, UK, pp. 7590.

Yah, N.F.; Oumer, A.N.; Idris, M.S. (2017). Small scale hydro-power as a source of renewable energy in Malaysia: A review. Renewable and Sustainable Energy Reviews, 72, 228239. http://doi.org/10.1016/j.rser.2017.01.068.

Hossain, M.; Huda, A.S.N.; Mekhilef, S.; Seyedmahmoudian, M.; Horan, B.; Stojcevski, A.; Ahmed, M. (2018). A state-of-the-art review of hydropower in Malaysia as renewable energy: Current status and future prospects. Energy Strategy Reviews, 22, 426437. https://doi.org/10.1016/j.esr.2018.11.001.

Walczak, N. (2018). Operational Evaluation of a Small Hydropower Plant in the Context of Sustainable Development. Water, 10, 1114. https://doi.org/10.3390/w10091114.

Tang, K.H.D. (2020). Hydroelectric dams and power demand in Malaysia: A planning perspective. Journal of Cleaner Production, 252, 119795. https://doi.org/10.1016/j.jclepro.2019.119795.

Rashidi, N.A.; Chai, Y.H.; Yusup, S. (2022). Biomass Energy in Malaysia: Current Scenario, Policies, and Implementation Challenges. Bioenergy Research, 15, 13711386. https://doi.org/10.1007/s12155-022-10392-7.

Lim, Y.F.; Chan, Y.J.; Abakr, Y.A.; Sethu, V.; Selvarajoo, A.; Singh, A.; Lee, J.; Gareth, M. (2021). Review of biowastes to energy in Malaysia: Current technology, scalability and socioeconomic analysis. Cleaner Engineering and Technology, 4, 100257. https://doi.org/10.1016/j.clet.2021.100257.

Zieliński, M.; Kazimierowicz, J.; Dębowski, M. (2023). Advantages and Limitations of Anaerobic Wastewater Treatment—Technological Basics, Development Directions, and Technological Innovations. Energies, 16, 83. https://doi.org/10.3390/en16010083.

Paolini, V.; Petracchini, F.; Segreto, M.; Tomassetti, L.; Naja, N.; Cecinato, A. (2018). Environmental impact of biogas: A short review of current knowledge. Journal of Environmental Science and Health, Part A, 53, 899906. https://doi.org/10.1080/10934529.2018.1459076.

Damyanova, S.; Beschkov, V. (2020). Biogas as a source of energy and chemicals. Biorefinery Concepts, Energy and Products. In Biorefinery Concepts, Energy and Products; Venko, B. Ed.; IntechOpen: London, UK. https://doi.org/10.5772/intechopen.90558.

Yong, Z.J.; Bashir, M.J.; Ng, C.A.; Sethupathi, S.; Lim, J.W.; Show, P.L. (2019). Sustainable waste-to-energy development in Malaysia: Appraisal of environmental, financial, and public issues related with energy recovery from municipal solid waste. Processes, 7, 676. https://doi.org/10.3390/pr7100676.

Mahdzir, M.; Talib, R.; Mohamed, N.N.A.N.; Qing, S.H.; Khuzzan, S.M.S.; Yahya, N.F.A.N. (2020). The Application Of Green Roof In Malaysian Construction Industry: Issues And Challenges. International Journal of Technology Management and Information System, 2(3), 923.

Chow, M.F.; Bakar, M.A. (2016). A review on the development and challenges of green roof systems in Malaysia. International Journal of Architectural and Environmental Engineering, 10, 1620. https://doi.org/10.5281/zenodo.1338620.

Azis, S.S.A.; Razali, M.N.M.; Maimun, N.H.A.; Yusoff, N.S.M.; Rahman, M.S.A.; Zulkifli, N.A.A. (2021). An Analysis On The Efficiency Of Green Roof In Managing Urban Stormwater Runoff. Planning Malaysia, 19, 111122. https://doi.org/10.21837/pm.v19i17.991.

Drozd, W. (2019). Problems and benefits of using green roofs in Poland. IOP Conference Series: Earth and Environmental Science, 214, 012076. http://doi.org/10.1088/1755-1315/214/1/012076.

Shaharudin, S.; Khalil, N.; Saleh, A.A. (2019). Review of significant maintenance criteria for tropical green roofs in Malaysia. International Journal of Technology, 10, 6980. http://doi.org/10.14716/ijtech.v10i1.1696.

Hafizi Md Lani, N.; Yusop, Z.; Syafiuddin, A. (2018). A review of rainwater harvesting in Malaysia: Prospects and challenges. Water, 10, 506. http://doi.org/10.3390/w10040506.

Juliana, I.C.; Syahril Badri Kusuma, M.; Cahyono, M.; Kardhana, H.; Martokusumo, W. (2017). Rainwater harvesting system implementation for domestic water use: the environment and financial benefits. In ICoSI 2014. Springer: Singapore, pp. 411421. http://doi.org/10.1007/978-981-287-661-4_41.

Rahman, A.; Keane, J.; Imteaz, M.A. (2012). Rainwater harvesting in Greater Sydney: Water savings, reliability and economic benefits. Resources, Conservation and Recycling, 61, 1621. https://doi.org/10.1016/j.resconrec.2011.12.002.

Rahman, S.; Khan, M.T.R.; Akib, S.; Din, N.B.C.; Biswas, S.K.; Shirazi, S.M. (2014). Sustainability of rainwater harvesting system in terms of water quality. The Scientific World Journal, 2014, 721357. https://doi.org/10.1155/2014/721357.

Afrose, T.; Anthony, L.; Fernandez, K.; Latt, S. (2018). Global access to clean water: the role of rain water harvesting. Annals of Reviews and Research, 2, 555585. http://dx.doi.org/10.19080/ARR.2018.02.555585.

Ong, Y.S.; Yusof, N.A.; Osmadi, A. (2021). Challenges of green office implementation: A case study in Penang, Malaysia. International Journal of Sustainable Construction Engineering and Technology, 12, 153163. https://doi.org/10.30880/ijscet.2021.12.01.015.

Yee, H.C.; Ismail, R.; Jing, K.T. (2020). The Barriers of Implementing Green Building in Penang Construction Industry. Progress in Energy and Environment, 12, 110.

Ayarkwa, J.; Opoku, D.G.J.; Antwi-Afari, P.; Li, R.Y.M. (2022). Sustainable building processes’ challenges and strategies: The relative important index approach. Cleaner Engineering and Technology, 7, 100455. https://doi.org/10.1016/j.clet.2022.100455.

Read Full-Text
About this article

SUBMITTED: 05 April 2023
ACCEPTED: 09 May 2023
PUBLISHED: 25 June 2023
SUBMITTED to ACCEPTED: 35 days
DOI: https://doi.org/10.53623/tebt.v1i1.238

Cite this article
Lau, Y. Y. ., Talukdar, G. ., Widyasamratri, H. ., Wang, J. ., & El-shaammari, M. (2023). Utilization of Green Materials and Technology for Sustainable Construction in Malaysia. Tropical Environment, Biology, and Technology, 1(1), 47–66. https://doi.org/10.53623/tebt.v1i1.238
Keywords
Construction Policies Management Green Sustainable Challenges Malaysia
Accessed
1259
Citations
0
Share this article