Instructions for Authors
Before submitting for publication, please check that your manuscript has been prepared in accordance to the step-by-step instructions for submitting a manuscript to our online submission system.
The type of articles can be described in detail as follows:
Research article should not exceed 8000 words (including abstract, figures, and tables but excluding references). Please note that small tables and figures each count as 300 words, and large tables or figures with multiple panels may count for 600 or more words. There should be no more than nine figures and tables (e.g., 5 figures and 4 tables maximum) in the main text. Any additional figures and tables should be placed in Supplementary Material. The abstract (up to 300 words), highlights and conclusions of papers in this journal must contain clear and concise statements.
Review article should not exceed 10,000 words, as defined above. Authors may submit manuscripts that provide in-depth critical review of a special subject. These reviews must provide a Synthesis and Critical Evaluation of the state of the knowledge of the subject and indicate research directions. The Editors also periodically invite review articles.
Short communication that present original and significant material for rapid dissemination. Short communication should not exceed 4000 words (including abstract, figures, and tables but excluding references). There should be no more four figures and tables (e.g., 2 figures and 2 tables maximum) in the main text.
Your manuscript should be in MS Word. You are advised to download the template when preparing your submissions to this journal. All manuscripts must be written in clear, comprehensible English. Both British and American English are accepted. Usage of non-English words should be kept to a minimum and all must be italicized, with the exception of "e.g." and "i.e." If you have concerns about the level of English in your submission, please ensure that it is proofread before submission by a native English speaker or a scientific editing service.
Types of Submission
Industrial and Domestic Waste Management accepts research articles, review articles, and short communications. Please read this section further for the definition of each type and select the appropriate option in the submission system. Submissions exceeding the suggested requirements, such as total manuscript length, will still be processed for consideration and peer review.
(The following content is the same with that in the "Section Policies")
All submissions should include a cover letter as a separate file. The cover letter is confidential and will be read only by the editors. It will not be seen by reviewers. A cover letter should contain the following:
- a brief explanation of what was previously known, the conceptual advancement with the findings and its significance to broad readership
- any associated accession numbers or DOIs of the corresponding preprint version of the submission if it has been deposited on a preprint server
- exclusion of individuals who might have conflict of interest from reviewing the work (including name, email address and affiliation)
- a statement that "neither the manuscript nor any significant part of it is under consideration for publication elsewhere or has appeared elsewhere in a manner that could be construed as a prior or duplication of the same work"
- conflict of interest statement
- a list of names of all co-authors of the work who have already seen and approved the manuscript and email addresses of the corresponding author(s)
- recommendations of two academically qualified reviewers (including name, email address and affiliation)
The title should capture the conceptual significance for a broad audience. The title should not be more than 50 words and should be able to give readers an overall view of the paper's significance. Titles should avoid using uncommon jargons, abbreviations and punctuation.
List of Authors
The names of authors must be spelled out rather than set in initials along with their affiliations. Authors should be listed according to the extent of their contribution, with the major contributor listed first. All corresponding authors should be identified with an asterisk. Affiliations should contain the following core information: department, institution, city, state, postal code, and country. For contact, email address of at least one corresponding author must be included. Please note that all authors must view and approve the final version of the manuscript before submitting.
Articles must include an abstract containing a maximum of 300 words. The purpose of abstract is to provide sufficient information for a reader to determine whether or not to proceed to the full text of the article. After the abstract, please give 5 keywords; please avoid using the same words as those already used in the title, separate terms with a semi-colon (term1; term2; term3).
Please number the section headings (e.g. 1, 2, 3, 4, etc.) and subheadings (e.g. 1.1, 1.2, 2.1, 2.2, etc.) in boldface. Further subsections of subheadings should be typeset in italics only with the numbers 1.1.1, 1.1.2, 2.1.1, 2.1.2, etc.
The introduction should provide a background that gives a broad readership an overall outlook of the field and the research performed. It tackles a problem and states its importance regarding with the significance of the study. Introduction can conclude with a brief statement of the aim of the work and a comment about whether that aim was achieved.
Materials and Methods
This section provides the general experimental design and methodologies used. The aim is to provide enough detail for other investigators to fully replicate the results. It is also required to facilitate better understanding of the results obtained. Protocols and procedures for new methods must be included in detail for the reproducibility of the experiments.
This section can be divided into subheadings and focuses on the results of the experiments performed.
This section should provide the significance of the results and identify the impact of the research in a broader context. It should not be redundant or similar to the content of the results section.
Please use the conclusion section for interpretation only, and not to summarize information already presented in the text or abstract.
The contributions of all listed authors should be described here.
Authors should declare all financial and non-financial support that have the potential to be deemed as a source of competing interest in relations to their submitted manuscript in this section. Financial supports are generally in the form of grants, royalties, consulting fees and others. Examples of non-financial support could include the following: externally-supplied equipment/biological sources, writing assistance, administrative support, contributions from non-authors, etc.
Conflict of Interest
All authors are required, at the time of submission, to declare all activities that have the potential to be deemed as a source of competing (commercial) interest in relation to their submitted manuscript. Examples of such activities could include personal or work-related relationships, events, etc. The disclosure should also include all sources of revenue paid (or promised to be paid) directly to authors or their institution on your behalf over the 36 months before submission of the relevant work. Authors who have nothing to declare are encouraged to add "No conflict of interest was reported by all authors" in this section.
During submission, the Conflict of Interest statement should be included in both the cover letter and manuscript (beneath the Acknowledgments section).
This section is compulsory and should be placed at the end of all manuscripts, but before the Appendix section. Do not use footnotes or endnotes as a substitute for a reference list. The list of references should only include works that are cited in the text and that have been published or accepted for publication. Personal communications and unpublished works should be excluded from this section.
For the reference list, only the first five authors are stated, followed by "et al." in italics. Authors being referenced are listed with their surname followed by their initials. All references should be numbered (e.g. 1, 2, 3, etc.) and sequenced according to the order they appear as the in-text citations. References should follow the following pattern: Author(s). Title of article. Abbreviated Title of Journal_Year; vol(issue): page range. If the DOI is available, please include it after the page range.
This section is optional and is for all materials (e.g. advanced technical details) that has been excluded from the main text but remain essential to the readers in understanding the manuscripts. This section is not for supplementary figures. Authors are advised to refer to the section on Supplementary Figures for such submissions. (This section should be placed at the very end, after the reference list.)
Submission Preparation Checklist
As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
- The submission has not been previously published, nor is it under consideration by another journal (or an explanation has been provided in Comments to the Editor).
- The manuscript has been written and formatted based on the journal requirements and style (including references) set out in Author Guidelines.
- For studies or experiments involving humans, animals and cell lines, relevant reporting guidelines have been followed (see specific policies here).
- All authors have contributed substantially to this work and consented to submit the paper to Industrial and Domestic Waste Management and to the best of authors' knowledge, the entire research and paper writing process were carried out in adherence to the highest academic conduct standards and research ethics codes.
- The conflicts or competing interests with any financial body or funding agency that might influence the results or interpretation of their submitted works has been declared as "conflict of interest statement" in the cover letter.
- All authors have read and understand the Copyright and License
- All authors have read the Submission Withdrawal Policy.
- Authors have provided the name, affiliation and address, and e-mail address of two potential reviewers who do not pose a conflict of interest.