Physical sampling and forecast-based production contribute substantially to material waste in fashion small and medium-sized enterprises (SMEs). However, 3D virtual garment simulation and demand-driven production have generally been investigated as separate waste reduction strategies. This study aimed to develop and validate a proof-of-concept model (Technology Readiness Level 3, TRL 3) integrating 3D virtual garment simulation and a pre-order system as sequential decision-making stages before production. A five-stage research and development approach was employed, incorporating a structured literature review, a needs assessment involving 22 informants from 15 purposively selected fashion SMEs in Malang, Indonesia, and expert validation. Five experts evaluated the proposed model using 12 indicators on a five-point Likert scale, with feasibility percentages and Aiken's V applied to assess feasibility and content validity. Two major sources of waste were identified: physical sampling during product development and production–demand mismatches. The proposed model incorporated two decision gates: design and fit validation using CLO3D (Gate 1) and order confirmation based on a minimum order quantity (Gate 2). Production was initiated only after both requirements were satisfied. The model achieved an overall feasibility score of 89.33% (mean = 4.47/5) and an Aiken's V coefficient of 0.87. Eleven of the 12 indicators satisfied the content validity criterion, whereas consumer interface accessibility remained below the threshold (V = 0.75). These findings demonstrated the model's preliminary feasibility and content validity, although its effectiveness in reducing material waste has not yet been empirically established. Future studies should evaluate its performance through fabric utilization efficiency, production lead time, and inventory management indicators.
Tang, K.H.D. (2023). State of the art in textile waste management: A review. Textiles, 3, 454–467. https://doi.org/10.3390/textiles3040027.
Shamsuzzaman, M.; Al Mamun, M.A.; Hasan, H.R.; et al. (2025). Fashion circularity: Potential of reusing and recycling remnant fabric to create sustainable products. Sustainability, 17, 2010. https://doi.org/10.3390/su17052010.
Papachristou, E.; Kalaitzi, D.; Pissas, V. (2023). A methodological framework for the integration of 3D virtual prototyping into the design development of laser-cut garments. Journal of Engineered Fibers and Fabrics, 18, 1–18. https://doi.org/10.1177/15589250231194621.
Islam, M.; et al. (2026). Digital transformation of fashion and textiles manufacturing: A systematic literature review. Textile Research Journal. https://doi.org/10.1177/00405175251375339.
Gui, L.; Long, X. (2024). Curbing fashion waste and overproduction: A supply chain perspective. In Responsible and Sustainable Operations; Springer Series in Supply Chain Management; Springer: Cham, Switzerland; Volume 24. https://doi.org/10.1007/978-3-031-60867-4_5.
Pardiyono, R.; Moengin, P.; Suryadi, K.; Safitri, D.M. (2026). The role of sustainability in innovation networks to enhance SME competitiveness: An integrative framework based on PRISMA and bibliometric mapping. Spektrum Industri, 24, 103–114. https://doi.org/10.12928/si.v24i1.600.
Womack, J.P.; Jones, D.T. (1996). Lean Thinking: Banish Waste and Create Wealth in Your Corporation; Simon & Schuster: New York, NY, USA.
Pagh, J.D.; Cooper, M.C. (1998). Supply chain postponement and speculation strategies: How to choose the right strategy. Journal of Business Logistics, 19, 13–33.
Cooper, R.G. (1990). Stage-gate systems: A new tool for managing new products. Business Horizons, 33, 44–54. https://doi.org/10.1016/0007-6813(90)90040-I.
Habib, A.; Ullah, A.; Maha, M.M.; et al. (2025). Advancing sustainable fashion through 3D virtual design for reduced environmental impact. Journal of Textile Engineering & Fashion Technology, 11, 135–142. https://doi.org/10.15406/jteft.2025.11.00415.
Baria, B.; Shahid, M.A.; Misra, A. (2025). Transformative effect of 3D sampling technology for the ready-made garment industry: A review. Textile Research Journal.
Liu, X.; Zhong, N. (2025). Research on improving the efficiency of garment sample production process based on virtual simulation technology. In Proceedings of the 2025 International Conference on Artificial Intelligence; Volume 2, pp. 389–397.
Edem, S.B.; et al. (2026). Environmental benefits of virtual sampling for garment production. Journal of Cleaner Production, 538, 147401.
Yates, M.; Phinney, C. (2025). Virtual (re)visions: The impact of 3D prototyping technology on fashion design process. In Proceedings of the International Textile and Apparel Association (ITAA) Annual Conference; Volume 82. https://doi.org/10.31274/itaa.21950.
Fitrihana, N. (2023). Penerapan teknologi virtual 3D untuk pengembangan produk fesyen [Application of virtual 3D technology for fashion product development]. Prosiding Pendidikan Teknik Boga Busana, 17, 3–7.
Greder, K.; Pei, J.; Kim, J.S. (2020). Design in 3D: A computational fashion design protocol. International Journal of Clothing Science and Technology, 32, 537–549.
Xu, Y.; Thomassey, S.; Zeng, X. (2020). Optimization of garment sizing and cutting order planning in the context of mass customization. The International Journal of Advanced Manufacturing Technology, 106, 3485–3503. https://doi.org/10.1007/s00170-019-04866-w.
Huang, S.; Huang, L. (2022). CLO3D-based 3D virtual fitting technology of down jacket. Wireless Communications and Mobile Computing, 2022, 5835026.
Li, X.; Li, X.; Li, Y.; Feng, W. (2023). Review of cloth modeling and simulation for virtual fitting. Textile Research Journal. https://doi.org/10.1177/00405175221135625.
Petrak, S.; Mahnić Naglić, M.; Glogar, M.; Tomljenović, A. (2025). Assessment of textile material properties and the impact of digital ink-jet fabric printing on 3D simulation as a sustainable method for garment prototyping. Sustainability, 17, 1388. https://doi.org/10.3390/su17041388.
Oosterom, E.B.; Baytar, F.; Akdemir, D.; Kalaoglu, F. (2024). Predicting consumers’ garment fit satisfactions by using machine learning. AUTEX Research Journal, 24, 20230016. https://doi.org/10.1515/aut-2023-0016.
Pietroni, N.; Dumery, C.; Falque, R.; Liu, M.; Vidal-Calleja, T.; et al. (2022). Computational pattern making from 3D garment models. ACM Transactions on Graphics, 41, 1–14. https://doi.org/10.1145/3528223.3530145.
Dai, J.; Dai, H.; Wang, J.; Wang, X. (2021). Children’s clothing virtual simulation immersive design and show based on machine learning. Mobile Information Systems, 2021, 2982729. https://doi.org/10.1155/2021/2982729.
Galada, A.; Baytar, F. (2025). Developing an instrument with simulations to measure 3D to 2D fit correction skills in fashion design. Fashion and Textiles, 12, 11.
Kusuma, A.A.; Ahsan, R.S.H.F.; Hidayati, N.; Sunandar, A.; Rahayu, S.E.P.; et al. (2025). Transformasi desain fesyen virtual 3D dengan teknologi artificial intelligence Luma [Transforming virtual 3D fashion design with Luma artificial intelligence technology]. JIPI (Jurnal Ilmiah Penelitian dan Pembelajaran Informatika), 10, 2700–2713. https://doi.org/10.29100/jipi.v10i3.8885.
Kusuma, A.A.; Amin, R.; Hidayati, N.; Sunandar, A.; Ahsan, R.S.H.F.; et al. (2025). Smart visual detection berbasis deep learning dengan menggunakan metode algoritma YOLO untuk identifikasi cacat pada produk garmen [Deep learning-based smart visual detection using the YOLO algorithm to identify defects in garment products]. JIPI (Jurnal Ilmiah Penelitian dan Pembelajaran Informatika), 10, 3704–3713. https://doi.org/10.29100/jipi.v10i4.9319.
Sunandar, A.; Kusuma, A.A.; Ahsan, R.S.H.F.; Rahayu, S.E.P.; Zakaria, M.H.B. (2025). Utilization of AI-based motion diffusion for modest wear-based design transformation Wastra Nusantara. Briliant: Jurnal Riset dan Konseptual, 10, 854–863. https://doi.org/10.28926/briliant.v10i4.2349.
Zhang, Y.; Zheng, Z.; Liu, L. (2024). Design resource deployment for virtual fitting applications in the era of digital fashion: An analysis based on Kano-QFD. SAGE Open, 14. https://doi.org/10.1177/21582440241296627.
Profumo, G.; Testa, G.; Viassone, M.; Ben Youssef, K. (2024). Metaverse and the fashion industry: A systematic literature review. Journal of Global Fashion Marketing, 15, 131–154. https://doi.org/10.1080/20932685.2023.2270587.
Kusuma, A.A.; Rusydiana, A.A.; Aziza, R.N.; Aulia, Z.S.; Nadhifah, N. (2026). Personalize fashion design based on body data and consumer preferences using artificial intelligence technology. In Proceeding of the International Conferences on Engineering Sciences (ICONFES); Volume 3, pp. 10–17. https://doi.org/10.61132/iconfes.v3i1.186.
Alsamarah, W.; Younes, B.; Yousef, M. (2022). Reducing waste in garment factories by intelligent planning of optimal cutting orders. Journal of the Textile Institute, 113, 1917–1925. https://doi.org/10.1080/00405000.2021.1956711.
Chrisnanto, Y.H.; Chrisnanto, J.E.; Oktavian, J. (2025). Comparative analysis of optimization methods for cut order planning in apparel manufacturing. Jurnal Sistem dan Manajemen Industri, 9, 79–93. https://doi.org/10.30656/jsmi.v9i2.10502.
Shang, X.; Shen, D.; Wang, F.; Nyberg, T.R. (2019). A heuristic algorithm for the fabric spreading and cutting problem in apparel factories. IEEE/CAA Journal of Automatica Sinica, 6, 961–968. https://doi.org/10.1109/JAS.2019.1911573.
Tsao, Y.-C.; Vu, T.-L.; Liao, L.-W. (2020). Hybrid heuristics for the cut ordering planning problem in apparel industry. Computers & Industrial Engineering, 144, 106478. https://doi.org/10.1016/j.cie.2020.106478.
Ünal, C.; Yüksel, A.D. (2020). Cut order planning optimisation in the apparel industry. Fibres & Textiles in Eastern Europe, 28, 8–13. https://doi.org/10.5604/01.3001.0013.5851.
Glogar, M.; Petrak, S.; Mahnić Naglić, M. (2025). Digital technologies in the sustainable design and development of textiles and clothing—A literature review. Sustainability, 17, 1371. https://doi.org/10.3390/su17041371.
Borg, W.R.; Gall, M.D. (1983). Educational Research: An Introduction, 4th ed.; Longman: New York, NY, USA.
Mankins, J.C. (2009). Technology readiness assessments: A retrospective. Acta Astronautica, 65, 1216–1223. https://doi.org/10.1016/j.actaastro.2009.03.058.
Snyder, H. (2019). Literature review as a research methodology: An overview and guidelines. Journal of Business Research, 104, 333–339. https://doi.org/10.1016/j.jbusres.2019.07.039.
Miles, M.B.; Huberman, A.M. (1994). Qualitative Data Analysis: An Expanded Sourcebook, 2nd ed.; Sage: Thousand Oaks, CA, USA.
Aiken, L.R. (1985). Three coefficients for analyzing the reliability and validity of ratings. Educational and Psychological Measurement, 45, 131–142. https://doi.org/10.1177/0013164485451012.
Tsao, Y.-C.; Delicia, M.; Vu, T.-L. (2022). Marker planning problem in the apparel industry: Hybrid PSO-based heuristics. Applied Soft Computing, 123, 108928. https://doi.org/10.1016/j.asoc.2022.108928.
Palinkas, L.A.; Horwitz, S.M.; Green, C.A.; Wisdom, J.P.; Duan, N.; Hoagwood, K. (2015). Purposeful sampling for qualitative data collection and analysis in mixed method implementation research. Administration and Policy in Mental Health and Mental Health Services Research, 42, 533–544. https://doi.org/10.1007/s10488-013-0528-y.
Polit, D.F.; Beck, C.T. (2006). The content validity index: Are you sure you know what’s being reported? Critique and recommendations. Research in Nursing & Health, 29, 489–497. https://doi.org/10.1002/nur.20147.
Hui, G.; Al Mamun, A.; Masukujjaman, M.; Makhbul, Z.K.M.; Ali, M.H. (2024). The relationship between mass customization and sustainable performance: The role of firm size and global e-commerce. Heliyon, 10, e27726.
Haryanto, A.; Sukma, I.; Darmawan, A. (2026). Barriers to green manufacturing implementation: A systematic literature review of internal and external challenges. Spektrum Industri, 24, 176–191. https://doi.org/10.12928/si.v24i1.573.
Liu, K.; Wu, H.; Zhu, C.; Wang, J.; Zeng, X.; et al. (2022). An evaluation of garment fit to improve customer body fit of fashion design clothing. The International Journal of Advanced Manufacturing Technology, 120, 2685–2699.
Al-Mahmud, S.; Cano, J.A.; Campo, E.A.; Weyers, S. (2025). Optimizing cut order planning: A comparative study of heuristics, metaheuristics, and MILP algorithms. International Journal of Production Management and Engineering, 13, 1–26. https://doi.org/10.4995/ijpme.2025.22196.
Hora, S.T.; Gruescu, C.-M.; Bungau, C.; Bodea, R. (2024). Innovative approaches to optimized cutting planning in the garment industry. Industria Textila, 75, 441–447. https://doi.org/10.35530/IT.075.04.202386.
Tsao, Y.-C.; Liu, C.-C.; Chen, P.-R.; Vu, T.-L. (2024). Design heuristics for cut order planning problems in the apparel industry. International Journal of Clothing Science and Technology. https://doi.org/10.1108/IJCST-07-2022-0087.
Kusuma, A.A.; Sunandar, A.; Rahayu, S.E.P.; Ahsan, R.S.H.F.; Andrianto, S.N.K.; et al. (2025). Pembuatan modul digital dan desain moodboard kreatif untuk instruktur dan lembaga pelatihan [Development of digital modules and creative moodboard design for instructors and training institutions]. Jurnal Pendidikan dan Pengabdian Masyarakat, 8, 464–471. https://doi.org/10.29303/jppm.v8i3.9736.
SUBMITTED: 28 October 2026
ACCEPTED: 13 November 2026
PUBLISHED:
18 November 2026
SUBMITTED to ACCEPTED: 16 days
DOI:
https://doi.org/10.53623/idwm.v6i2.1496