Skip to main content
Article | Civil and Sustainable Urban Engineering | Volume 5 - Issue 1 - 2025 | 1-14 | https://doi.org/10.53623/csue.v5i1.560
© 2025 by the author(s), and is licensed under the Creative Commons Attribution 4.0 International (CC BY 4.0) License Creative Commons Attribution 4.0 International (CC BY 4.0) License

Enhancing Urban Runoff Quality with Iron Slag-Modified Pervious Concrete: A Study on Mechanical Properties and Pollutant Removal Efficiency

Author(s): Ehsan Teymouri , Taylor Davis
Author(s) information:
PurePave Technologies Inc. 1505 Laperriere Ave, K1Z 7T1, Ottawa, ON, Canada

Corresponding author

Civil and Sustainable Urban Engineering

Volume 5 - Issue 1 - 2025

 About the journal
Submit your article

This study explores the improvement of the performance of pervious concrete (PC) for enhancing urban runoff quality by incorporating fine-grained iron slag in varying proportions, from 0% to 15% of the coarse aggregate weight. The research addresses the pressing challenges of stormwater management in urban areas, where impervious surfaces contribute significantly to increased runoff and water pollution. To tackle these issues, the study aims to optimize PC composition. Mechanical and physical properties, including compressive strength, hydraulic conductivity, and void content, were assessed. The top-performing mixes were further evaluated for their ability to improve runoff quality using a rainfall simulator and PC slabs measuring 650×450×100 mm. Initial findings showed a positive relationship between higher iron slag content and increased compressive strength, with gains of up to 13%. However, this improvement came with reduced porosity and permeability as iron slag content increased. Notably, the sample with 15% iron slag demonstrated high pollutant removal efficiencies: 42.7% for chemical oxygen demand (COD), 43.68% for total suspended solids (TSS), and 33.95% for turbidity, due to the dual effects of pore filling and contaminant adsorption by the iron slag. No significant changes were observed in NaCl and electrical conductivity (EC) levels. This study highlights the potential of optimizing iron slag content in PC to enhance its role in urban runoff management, presenting a promising approach for improving water quality in urban settings.

Read Full-Text
Previous article
Next article

Gu, J.; Zhang, Q.; Gu, D.; Zhang, Q.; Pu, X. (2018). The impact of uncertainty factors on optimal sizing and costs of low-impact development: a case study from Beijing, China. Water Resources Management, 32, 4217‒4238. https://doi.org/10.1007/s11269-018-2040-3.

Hou, Y.; Ding, W.; Liu, C.; Li, K.; Cui, H.; Liu, B.; Chen, W. (2022). Influences of impervious surfaces on ecological risks and controlling strategies in rapidly urbanizing regions. Science of The Total Environment, 825, 153823. https://doi.org/10.1016/j.scitotenv.2022.153823.

Teymouri, E.; Wong, K.S.; Pauzi, N.N.M. (2023). Iron slag pervious concrete for reducing urban runoff contamination. Journal of Building Engineering, 70, 106221. https://doi.org/10.1016/j.jobe.2023.106221.

Müller, A.; Österlund, H.; Marsalek, J.; Viklander, M. (2020). The pollution conveyed by urban runoff: A review of sources. Science of the Total Environment, 709, 136125. https://doi.org/10.1016/j.scitotenv.2019.136125.

Yang, L.; Li, J.; Zhou, K.; Feng, P.; Dong, L. (2023). The effects of surface pollution on urban river water quality under rainfall events in Wuqing district, Tianjin, China. Journal of Cleaner Production, 293, 126136. https://doi.org/10.1016/j.jclepro.2021.126136.

Teymouri, E.; Pauzi, N.N.M.; Wong, K.S. (2023). Developing lignite pervious concrete for application in pedestrian walkways and urban runoff treatment. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 47(5), 2949‒2967. https://doi.org/10.1007/s40996-023-01113-x.

Kong, Z.; Shao, Z.; Shen, Y.; Zhang, X.; Chen, M.; Yuan, Y.; Chai, H. (2021). Comprehensive evaluation of stormwater pollutants characteristics, purification process and environmental impact after low impact development practices. Journal of Cleaner Production, 278, 123509. https://doi.org/10.1016/j.jclepro.2020.123509.

Chandrappa, A.K.; Biligiri, K. P. (2016). Influence of mix parameters on pore properties and modulus of pervious concrete: an application of ultrasonic pulse velocity. Materials and Structures, 49, 5255‒5271. https://doi.org/10.1617/s11527-016-0858-9.

Teymouri, E.; Wong, K.S.; Tan, Y.Y.; Pauzi, N.N.M. (2023). Mechanical behaviour of adsorbent pervious concrete using iron slag and zeolite as coarse aggregates. Construction and Building Materials, 388, 131720. https://doi.org/10.1016/j.conbuildmat.2023.131720.

Vincent, J.; Kirkwood, A.E. (2014). Variability of water quality, metals and phytoplankton community structure in urban stormwater ponds along a vegetation gradient, Urban Ecosystems, 17, 839‒853. https://doi.org/10.1007/s11252-014-0356-1.

Bruinsma, J.; Smith, K.; Peshkin, D.; Ballou, L.; Eisenberg, B.; Lurie, C.; Haselbach, L. (2017). Guidance for usage of permeable pavement at airports. (No. Project 02-64). http://www.trb.org/Main/Blurbs/176396.aspx.

Putri, F.K.; Hidayah, E.; Ma'ruf, M.F. (2023). Enhancing stormwater management with low impact development (LID): A review of the rain barrel, bioretention, and permeable pavement applicability in Indonesia. Water Science & Technology, 87(9), 2345‒2361. https://doi.org/10.2166/wst.2023.095.

Liu, T.; Lawluvy, Y.; Shi, Y.; Yap, P.S. (2021). Low impact development (LID) practices: A review on recent developments, challenges and prospects. Water, Air, & Soil Pollution, 232(9), 344. https://doi.org/10.1007/s11270-021-05262-5.

Lee, M.G.; Tia, M.; Chuang, S.H.; Huang, Y.; Chiang, C.L. (2014). Pollution and purification study of the pervious concrete pavement material”, Journal of Materials in Civil Engineering, 26(8), 04014035. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000916.

Karami, H., Teymouri, E.; Mousavi, S.F.; Farzin, S. (2018). Experimental investigation of the effect of adding LECA and pumice on some physical properties of porous concrete: some physical properties of porous concrete. Engineering Journal, 22(1), 205‒213.;https://doi.org/10.4186/ej.2018.22.1.205.

AlShareedah, O.; Nassiri, S. (2021). Pervious concrete mixture optimization, physical, and mechanical properties and pavement design: A review. Journal of Cleaner Production, 288, 125095.https://doi.org/10.1016/j.jclepro.2020.125095.

Teymouri, E.; Wong, K.S.; Rouhbakhsh, M.; Pahlevani, M.; Forouzan, M. (2023). Evaluating the Clogging Phenomenon in Pervious Concrete from January 2015 to December 2022”, Civil and Sustainable Urban Engineering, 3(1), 70‒80. https://doi.org/10.53623/csue.v3i1.236.

García-Haba, E.; Hernández-Crespo, C.; Martín, M.; Andrés-Doménech, I. (2023). The role of different sustainable urban drainage systems in removing microplastics from urban runoff: A review. Journal of Cleaner Production, 411, 137197. https://doi.org/10.1016/j.jclepro.2023.137197.

PurePave permeable surfacing. (accessed on 19 September 2024) Available online: https://www.purepave.com/.

Kim, G.M.; Jang, J.G.; Khalid, H.R.; Lee, H.K. (2017). Water purification characteristics of pervious concrete fabricated with CSA cement and bottom ash aggregates. Construction and Building Materials, 136, 1‒8. https://doi.org/10.1016/j.conbuildmat.2017.01.020.

Teymouri, E.; Wong, K.S.; Tan, Y.Y.; Pauzi, N.N.M. (2024). Post-treatment of municipal wastewater using zeolite pervious concrete. Journal of Water Process Engineering, 68, 106408. https://doi.org/10.1016/j.jwpe.2024.106408.

Tota-Maharaj, K.; Karunanayake, C.; Kunwar, K.; Chadee, A.A.; Azamathulla, H.M.; Rathnayake, U. (2024). Evaluation of Permeable Pavement Systems (PPS) as Best Management Practices for Stormwater Runoff Control: A Review. Water Conservation Science and Engineering, 9(1), 32. https://doi.org/10.1007/s41101-024-00259-7.

Chen, X.; Niu, Z.; Zhang, H.; Lu, M.; Lu, Y.; Zhou, M.; Li, B. (2020). Design of a chitosan modifying alkali-activated slag pervious concrete with the function of water purification. Construction and Building Materials, 251, 118979. https://doi.org/10.1016/j.conbuildmat.2020.118979.

Ibrahim, A.M.; Mohamed, A.R.; El-Khatib, A.M.; Alabsy, M.T.; Elsalamawy, M. (2021). Effect of hematite and iron slag as aggregate replacement on thermal, mechanical, and gamma-radiation shielding properties of concrete. Construction and Building Materials, 310, 125225. https://doi.org/10.1016/j.conbuildmat.2021.125225.

Ragipani, R.; Bhattacharya, S.; Akkihebbal, S.K. (2020). Understanding dissolution characteristics of steel slag for resource recovery. Waste Management, 117, 179‒187. https://doi.org/10.1016/j.wasman.2020.08.008.

Koupai, J.A.; Nejad, S.S.; Mostafazadeh-Fard, S.; Behfarnia, K. (2016). Reduction of urban storm-runoff pollution using porous concrete containing iron slag adsorbent. Journal of Environmental Engineering, 142(2), 04015072. https://doi.org/10.1061/(ASCE) EE.1943-7870.0001025.

ASTM C150. (2012), Standard specification for Portland cement. ASTM C150/C150M, West Conshohocken, PA, USA.

ASTM C33 (2003). Standard specification for concrete aggregates. ASTM C33/C33M, West Conshohocken, PA, USA.

Lori, A.R.; Hassani, A.; Sedghi, R. (2019). Investigating the mechanical and hydraulic characteristics of pervious concrete containing copper slag as coarse aggregate. Construction and Building Materials, 197, 130‒142. https://doi.org/10.1016/j.conbuildmat.2018.11.230.

Guide for Selecting Proportions for No slump Concrete, ACI 211.3R Report. (accessed on 19 September 2024) Available online: https://www.concrete.org/store/productdetail.aspx?ItemID=211302.

ASTM C143. (2012). Standard test method for slump of hydraulic-cement concrete. ASTM C143/C143M, West Conshohocken, PA, USA.

ASTM C1688. (2008). Standard test method for density and void content of freshly mixed pervious concrete, ASTM C1688/C1688, West Conshohocken, PA, , USA.

British Standard (1983). Testing Concrete Method for making test cubes from fresh concrete. BS 1881, Part 108.

ASTM C1754. (2012). Standard test method for density and void content of hardened pervious concrete. ASTM C1754/1754M, International, USA.

Pervious concrete, ACI522R-06 Report. (accessed on 19 September 2024) Available online: https://www.concrete.org/publications/internationalconcreteabstractsportal/m/details/id/15614.

James, W.; Von Langsdorff, H. (2003). The use of permeable concrete block pavement in controlling environmental stressors in urban areas. 7th international conference on concrete block paving, Sun City, South Africa, p. 1215.

Faisal, G.H.; Jaeel, A.J.; Al-Gasham, T.S. (2020). BOD and COD reduction using porous concrete pavements. Case Studies in Construction Materials, 13, e00396. https://doi.org/10.1016/j.cscm.2020.e00396.

Pauzi, N.N.M.; Teymouri, E.; Soon, W.K.; Yong, T.Y. (2024). Comparative Analysis of Adsorbent Pervious Concrete: Engineering Properties and Environmental Consideration. Journal of Advanced Research in Applied Mechanics, 119(1), 92‒111. https://doi.org/10.37934/aram.119.1.92111.

Elango, K.S.; Gopi, R.; Saravanakumar, R.; Rajeshkumar, V.; Vivek, D.; Raman, S. V. (2021). Properties of pervious concrete–A state of the art review. Materials Today: Proceedings, 45, 2422‒2425. https://doi.org/10.1016/j.matpr.2020.10.839.

Kitchener, B.G.; Wainwright, J.; Parsons, A.J. (2017). A review of the principles of turbidity measurement. Progress in Physical Geography, 41(5), 620‒642. https://doi.org/10.1177/0309133317726540.

Teymouri, E.; Mousavi, S.F.; Karami, H.; Farzin, S.; Kheirabad, M.H. (2020). Municipal Wastewater pretreatment using porous concrete containing fine-grained mineral adsorbents. Journal of Water Process Engineering, 36, 101346. https://doi.org/10.1016/j.jwpe.2020.101346.

Azad, A.; Sheikh, M.N.; Hai, F. I. (2024). A critical review of the mechanisms, factors, and performance of pervious concrete to remove contaminants from stormwater runoff. Water Research, 251, 21101. https://doi.org/10.1016/j.watres.2024.121101.

Singh, A. Sampath, P.V.; Biligiri, K.P. (2020). A review of sustainable pervious concrete systems: Emphasis on clogging, material characterization, and environmental aspects. Construction and Building Materials, 261, 20491. https://doi.org/10.1016/j.conbuildmat.2020.120491.

Read Full-Text
About this article

SUBMITTED: 17 December 2024
ACCEPTED: 28 January 2025
PUBLISHED: 4 February 2025
SUBMITTED to ACCEPTED: 42 days
DOI: https://doi.org/10.53623/csue.v5i1.560

Cite this article
Teymouri, E., & Davis, T. (2025). Enhancing Urban Runoff Quality with Iron Slag-Modified Pervious Concrete: A Study on Mechanical Properties and Pollutant Removal Efficiency. Civil and Sustainable Urban Engineering, 5(1), 1–14. https://doi.org/10.53623/csue.v5i1.560
Keywords
pervious concrete iron slag stormwater management stormwater treatment
Accessed
71
Citations
0
Share this article